How to Change the Dome Light in a 2009 Chevy Traverse
- 1). Sit behind the dome light assembly. Pry the rear of the light assembly down with a flat-bladed screwdriver until the retaining clips release.
- 2). Slide the front of the light assembly out of place, using caution not to break the tabs in the front.
- 3). Remove the three small Torx screws securing the bulb with a Torx screwdriver. Pull the bulb out of the socket. Push the new bulb into place until it is all the way in the socket. Replace the Torx screws and tighten them with the Torx screwdriver.
- 4). Align the front of the cover in position, then push the back of the light cover up into place. The clips will click when they are secure.
Source...