How to Remove a Silverado Dashboard

104 3
    • 1). Turn off the engine of the Silverado and open the hood to access the battery. Remove the negative terminal from the battery with a socket wrench.

    • 2). Remove the kick panels on both sides of the vehicle by removing the four screws securing each panel with a Phillips screwdriver and pulling the panel out of the Silverado.

    • 3). Remove the glove compartment by opening it and removing the two screws securing it to the Silverado. Pull it out of the vehicle.

    • 4). Remove the instrument panel dash trim screws. There are two above the instrument panel and two below. Pull out the dash trim.

    • 5). Remove the two screws securing the radio and the two screws securing the HVAC unit. Pull the devices out of the center console and disconnect their electrical-plug connectors. Remove them from the vehicle.

    • 6). Remove the four securing screws from the instrument panel. Pull it out with a slotted screwdriver and disconnect the electrical-plug connector. Remove it from the vehicle.

    • 7). Uninstall the four screws at the corners of the center console faceplate. Remove it from the Silverado.

    • 8). Insert the slotted screwdriver in between the windshield and the upper dash trim. Pry it upward and remove it. Disconnect any remaining electrical-plug connectors.

Source...
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time

Leave A Reply

Your email address will not be published.