How to Flush Out Water Lines on a Hybrid Camper
- 1). Park the camper in an area with adequate drainage for the waste water as it flushes from the camper. Level the camper, place wheel chicks under the tires, and detach it from your towing vehicle.
- 2). Attach the water to the intake nozzle on the hybrid. Turn the water on. Open all faucets in the camper. Let the water run for at least an hour. Open the drain plug of the gray water tank so the water flows out of the camper.
- 3). Turn off the sinks, and place a funnel into the intake nozzle. Add one cup of bleach into the tank and system. Place the water connection back onto the nozzle, and turn on all faucets. Let the water run for at least an hour.
- 4). Turn off the water, and let the system set for two to three hours. Return, and turn on all faucets.
- 5). Smell for any bleach odor coming from the faucets. When no bleach scent is present, turn off the faucets, and remove the water connections.
Source...