How to Replace an Olevia LCD Inverter Board
- 1). Turn off your Olevia monitor and disconnect it from the computer.
- 2). Remove any screws from the plastic frame that surrounds the screen with your Phillips screwdriver.
- 3). Insert the tip of your flat-head screwdriver in the seam between the plastic frame and the screen itself. Then work your way around the side of the screen until it separates from the monitor. Set it aside.
- 4). Locate the green inverter board just below the screen. Use your fingers to unplug the cables that connect to either end of the inverter.
- 5). Remove the old inverter from the bottom of the screen and replace it with the new inverter (available from your Olevia retailer or online). Then reassemble your monitor in the reverse order you took it apart.
Source...