How to Replace the Screen on an HP DV5000
- 1). Turn off your HP DV5000 and remove the AC power cable.
- 2). Unplug the battery from its compartment on the bottom of the computer.
- 3). Remove the screws on the top and bottom of the plastic frame around the LCD screen.
- 4). Insert the tip of your screwdriver underneath one corner of the plastic frame and gently pop it off.
- 5). Locate the rectangular inverter board mounted below the LCD screen and unplug the cables at either end of it.
- 6). Remove the screws on the metal brackets on either side of the LCD screen.
- 7). Pull the screen slightly forward to expose the back of it. Unplug the screen ribbon cable from its port on the back of the computer.
- 8). Remove the old screen from the brackets and fit a new one in its place. Plug the screen cable in and reverse the steps for reassembly.
Source...