Handrail bracket systems are difficult and complicated to install, even for veteran and experienced carpenters. It is also said that some particular kinds of handrails are trickier to put together than others. The handrails are composed of straight boards connected with one another. Installing handrails is the last job of constructing the entire stair system. Usually, it starts with the finishing of the wood and attached with the rest of the stair system, and finally the set of connected pieces appears as a single continuous piece.

Usually, the handrails are connected to the staircase through several parts. Handrail brackets are attached with the balusters and placed vertically to the staircase flooring also known as the tread. In fact, according ot the domestic staircase regulation, the distance between the handrails and the floor must be a minimum of 900 mm. In case, the required minimum distance is not maintained, there are chances of minor stair accidents. If the balusters are shorter, the staircase may not provide enough side protection.

Installing Handrail Brackets

It is true that the balusters are an integral part of every staircase, but they are not enough to provide the adequate support to the staircase. or the handrails. Newel post supports the handrails, and placed in the large post at the base of staircase.

Installing a handrail for a classic one-story staircase is a tough job. Installing a circular staircase, spiral staircases, and stairs with multiple right angle turns, will make the construction more complicated. Contact a good quality carpenter to get it fixed for the best results.