How Do I Install a DVD Player to a VHS Player?
- 1). Determine what types of cables to use to connect the two. Some DVD players come equipped with coaxial connections, in which case you can connect the DVD player to the VCR using a coaxial cable. More commonly, DVD players have RCA video output connections; if your VCR has RCA video input connections, you can use RCA cables to connect the two as well. Determine which type you would like to use and purchase the cable or cables if you do not have them already.
- 2). Connect the DVD player to a VCR. For a coaxial connection, simply screw one end to the coaxial output on the DVD player and the other end to the coaxial input on the VCR. For RCA connections, connect one end of the RCA cables to the video out on the DVD player and the other end to the video in on the VCR. The two devices have now been connected.
- 3). Configure the VCR. If you use a coaxial connection between the two devices, the VCR will have to be set to either channel 3 or 4. For an RCA connection, the VCR will have to be set to the video input, usually done by channeling down until you get to channel 2 and then channeling down once or twice more until the screen reads "video," "A/V" or something similar.
Source...