How to Use Car Speakers In Home Audio
- 1). Place a car speaker into a speaker box making sure to line up the speaker posts in the back with the red and black wire adapters in the box. Screw the speaker into the box until secure.
- 2). Cut speaker wire long enough to reach the home audio system that you want to attach it to. Leave a little extra length in case you choose to move it at a later date. Separate the wire from the end about three inches. Strip the wire about an inch from the end by using wire stripper to pull off the rubber insulation. Do this for each set of speaker wires.
- 3). Place one end of each speaker wire into the back of the speaker box. Make sure that the wires do not cross each other.
- 4). Place the other end of the wire into the speaker output on the home audio system. Repeat for any other speakers.
Source...