Hot To Made The Level Settings On A Car Amp
In this article we will discuss How to Set the Level on a Car Stereo Amplifier? Amplifier is a simple device which is used to amplify the sound waves. When you add an amplifier to your car’s audio system the sound of your audio system is improved in an effective manner. It is very important to know how the level of the amplifier should be adjusted properly to get a good quality sound with required loudness level. Adjusting this amplifier will take not more than two minutes. It is very simple and easy.
This article includes the things that will be required for adjusting the level on a car stereo amplifier and the instructions that will let you adjust the stereo amplifier properly to get the best quality sound with required loudness level. The things that are required to do this job of setting level on car amplifier are amplifier, flat bladed screw driver, compact disc or other music device.
Controls on your amplifier can be divided into two. They are gain controls and tone controls. Initially the gain control is turned left side completely. Turning the control all the way to the left means the control is set to minimum or zero level. Sometimes the gain control knob may be termed as “level”. So be careful to not get confused. In some amplifier the controls can be adjusted with your fingers but in some amplifiers the controls cannot be operated using the fingers. In such case the flat bladed screw drivers are used to adjust the controls. Some amplifiers have more than one gain levels. In such case set all the gain controls to minimum turning them all to their extreme left.
After adjusting all the gain controls to minimum set the tone control of the stereo amplifier to flat no boost. If the amplifier has more than one tone control then set all the tone controls to the minimum position. Later on after the amp’s level is set these tone controls can be adjusted based on your liking or taste.
Switch on your car’s audio system and play music from your compact disc or from your little portable storage device. Play a song of your own choice. It is advised to select a song that matches your listening taste.
Adjust the car’s audio system volume to three fourth of the maximum. This can be done with fingers. This will not require any flat bladed screw driver. The gain control is turned to its right very slowly. Turning the gain control to its right is continued till you hear the distortion of sound. When you listen the distortion stop turning the control to its right and turn it to its left so that no distortion of sound is heard.
If the amplifier contains more than one gain control instructions mentioned in the above two paragraphs are repeated again and again to get the good quality sound.
Thus this article guides you How to Set the Level on a Car Stereo Amplifier on your own.
source:
Hot to Made the Level Settings on a Car Amp
This article includes the things that will be required for adjusting the level on a car stereo amplifier and the instructions that will let you adjust the stereo amplifier properly to get the best quality sound with required loudness level. The things that are required to do this job of setting level on car amplifier are amplifier, flat bladed screw driver, compact disc or other music device.
Controls on your amplifier can be divided into two. They are gain controls and tone controls. Initially the gain control is turned left side completely. Turning the control all the way to the left means the control is set to minimum or zero level. Sometimes the gain control knob may be termed as “level”. So be careful to not get confused. In some amplifier the controls can be adjusted with your fingers but in some amplifiers the controls cannot be operated using the fingers. In such case the flat bladed screw drivers are used to adjust the controls. Some amplifiers have more than one gain levels. In such case set all the gain controls to minimum turning them all to their extreme left.
After adjusting all the gain controls to minimum set the tone control of the stereo amplifier to flat no boost. If the amplifier has more than one tone control then set all the tone controls to the minimum position. Later on after the amp’s level is set these tone controls can be adjusted based on your liking or taste.
Switch on your car’s audio system and play music from your compact disc or from your little portable storage device. Play a song of your own choice. It is advised to select a song that matches your listening taste.
Adjust the car’s audio system volume to three fourth of the maximum. This can be done with fingers. This will not require any flat bladed screw driver. The gain control is turned to its right very slowly. Turning the gain control to its right is continued till you hear the distortion of sound. When you listen the distortion stop turning the control to its right and turn it to its left so that no distortion of sound is heard.
If the amplifier contains more than one gain control instructions mentioned in the above two paragraphs are repeated again and again to get the good quality sound.
Thus this article guides you How to Set the Level on a Car Stereo Amplifier on your own.
source:
Hot to Made the Level Settings on a Car Amp
Source...