Start to Finish

• 1). Take one transceiver and attach it to the hot shoe on top of the camera. Set both transceivers to the same radio channel, if there are multiple choices.
  
  
• 2
  A camera attached to a tripod.slr on a tripod image by Aussiebloke from Fotolia.com
  
  Attach camera to the tripod or gorillapod by screwing it into the bottom of the camera. Move on to Step 3 if you are not using a tripod.
  
  
• 3). Turn on the camera, followed by both transceivers. Test the shutter release by pressing the button on the off-camera transceiver. Ensure a clear line of sight from the camera to shutter release.
  
  
• 4
  Remote locations to place cameraKONICA MINOLTA DIGITAL CAMERA image by Anna Grebneva from Fotolia.com
  
  Place the camera in remote location. Secure the camera, either using the tripod or to a nearby object using ball bungees. Look through the eyepiece to set composition. If you are outdoors and rain is likely, place a protective cover such as a plastic bag around the camera.
  
  
• 5
  Get close to wild animals with remote shutter release.lion image by graham tomlin from Fotolia.com
  
  Travel allocated distance from camera and press the transceiver when ready. Camera will photograph remotely.